User's Manual

Chapter 7: Event Rules, Event Actions and Application Logs
147
Placeholder
Description
[LHXSUPPORTENABLED]
The Schroff LHX Support state
[MONITOREDHOST]
The name or IP address of a monitored host
[OLDSENSORSTATE]
The numeric ID of the previous sensor state
[OLDVERSION]
The firmware version the device is being
upgraded from
[OUTLETPOLE]
The outlet power line identifier
[OUTLETSENSOR]
The outlet sensor name
[PDUPOLESENSOR]
The sensor name for a certain power line
[PLSENSOR]
The Power Logic Device sensor id
[PLSENSORNAME]
The Power Logic Device sensor name
[PORTID]
The label of the external port, the event
triggering device is connected to
[PORTTYPE]
The type of the external port (for example,
'feature' or 'auxiliary', the event triggering
device is connected to)
[RACKSLOT]
The (horizontal) slot position, an action
applies to
[SENSORINTVALUE]
The integer value of a sensor reading or
state
[SENSORREADING]
The value of a sensor reading
[SENSORREADINGUNIT]
The unit of a sensor reading
[SENSORSTATE]
The numeric ID of the current sensor state
[SENSORTYPE]
The type of a sensor
[SERVER]
The name or IP address of a server
[SMTPRECIPIENTS]
The list of recipients, an SMTP message
was sent to
[SMTPSERVER]
The name or IP address of an SMTP server
[TIMESTAMP]
The timestamp of the event occurance
[TYPEDPORTID]
The port id with type prefix ('A' for auxiliary,
'F' for feature)
[UMTARGETROLE]
The name of a user management role, an
action was applied on