User's Manual

Chapter 5: EMX Device Management
103
2. Launch a terminal emulation program such as HyperTerminal,
Kermit, or PuTTY, and open a window on the EMX.
3. Press (and release) the Reset button of the EMX device while
pressing the Esc key of the keyboard several times in rapid
succession. A prompt (=>) should appear after about one second.
4. Type defaults to reset the EMX to its factory defaults.
5. Wait until the Username prompt appears, indicating the reset is
complete.
Note: HyperTerminal is available on Windows operating systems prior to
Windows Vista. For Windows Vista or later versions, you may use
PuTTY, which is a free program you can download from the Internet. See
PuTTY's documentation for details on configuration.