User Manual KVM Switch MCC4, MCC8, MCC16 MCC4R, MCC8R, MCC16R MCC8RD, MCC16RD

32 MASTERCONSOLE II USER MANUAL
TERM DEFINITION
Remote Console Keyboard, monitor, and mouse plugged into the Remote access kit.
Cat5 Remote KVM Module: Optional Remote Unit that connects to the
MasterConsole II to provide additional access to connected computers up to
650' away using Cat5 UTP Cable.
Cat5 Remote KVM Port: The Keyboard, Monitor, and Mouse ports on the
back of the Cat5 Remote KVM Module unit.
Satellite Unit Second-tier MasterConsole II located more than 30 feet from the base unit
and connected through its Remote Access Kit.
Scan Front panel button and On-Screen User Interface function used to activate
AutoScan.
Scan Rate The duration (in seconds) a channel’s computer is to remain displayed on the
monitor when AutoScan is activated.
Global Scan Rate: Scan rate is the same for all computers, if the Mode field
in the Configuration Menu is set to Global.
Channel-Specific (Individual) Scan Rate:: Scan rate specified for each
computer during the Scan cycle, if the Mode field in the Configuration Menu
is set to Individual. Channel-specific scan rates can be set in the Edit Names
and Scan Rate Menu.
Security When activated, and the system remains idle for a period of time, the next
user must enter an authorized User Password to establish access.
Selection Menu Used to select a computer.
Sorting Order of the channels listed in Selection Menu; either by Channel ID or by
Name.
Time Out the length of time that the system can remain idle (that is, since the last
keyboard/mouse or front panel operation) before the next user must enter an
authorized User Password to establish access.
User Password Enables access to the system after Time Out.