User's Manual

Chapter 2: Installation and Configuration

3. Launch the terminal emulation program you want to use to configure

the KX II-101.

4. Set the following port settings in the terminal emulation program:

 Bits per second - 115200

 Data bits - 8

 Parity - None

 Stop bits - 1

 Flow control - None

5. Connect to the KX II-101. The login page opens.

6. Type the administrator user name and press Enter. You are

prompted to enter your password.

7. Type your password and press Enter. The Admin Port prompt

appears.

8. At the Admin Port > prompt, type config and press Enter.

9. At the Config > prompt, type network and press Enter.

10. To view the current interface settings, at the Interface > prompt, type

interface and press Enter. The current interface settings appear.