Home Security System User Manual

Chapter 15: Advanced Administration
258
Command syntax Device ID value You should type
ssh -id <device_id>
100
ssh -id 100
• The default escape character is a tilde followed by a period. For
example:
~.
See End SSH Connections (on page 260) for details on using the
escap
e character and the exit command.
You may have problems using the escape character in the Linux
terminal or client. Raritan recommends that you define a new escape
character when establishing a port connection. The command is
connect [-e <escape_char>] [port_id]. For example, to
define "m" as the escape character when connecting to the port with id
2360, type connect -e m 2360.
Create an SSH Connection to a Serial-Enabled Device
You can create an SSH connection to a serial-enabled device to perform
administrative operations on the device. Once connected, the
administrative commands supported by the serial-enabled device are
available.
Note: Before you connect, ensure that the serial-enabled device has
been added to the CC-SG.
1. Type listdevices to ensure the serial-enabled device has been
added to CC-SG.