User manual

Chapter 8: Nodes, Node Groups, and Interfaces
119
To add an IPMI power control interface to the CSV file:
Column
number
Tag or value Details
1
ADD
The first column for all tags is the
command ADD.
2
NODE-IPMI-INTERFACE
Enter the tag as shown.
Tags are not case sensitive.
3 Node Name Required field.
4 Interface Name Required field.
5 IP Address or Hostname Required field.
6 UDP Port Default is 623
7 Authentication
MD5, None, OEM, or PASSWORD
Default is PASSWORD.
8 Interval Enter the check interval in seconds.
Default is 550.
9 Service Account Name Leave blank if specifying username
and password.
10 Username Leave blank if specifying service
account.
11 Password Leave blank if specifying service
account.
12 Description Optional.
To add a managed powerstrip interface to the CSV file:
Column
number
Tag or value Details
1
ADD
The first column for all tags is the
command ADD.
2
NODE-POWER-INTERFACE
Enter the tag as shown.
Tags are not case sensitive.
3 Node Name Required field.
4 Interface Name Required field.
5 Powerstrip Name Required field.
6 Outlet Required field.
7 Managing Device The name of the device that the