Switch User Manual

Chapter 4: Rack PDU (Power Strip) Outlet Control

Initially, when you open the Powerstrip page, the power strips that are

currently connected to the KSX II are displayed in the Powerstrip

drop-down. Additionally, information relating to the currently selected

power strip is displayed. If no power strips are connected to the KSX II, a

message stating "No powerstrips found" will be displayed in the

Powerstrip Device section of the page.

Turning Outlets On/Off and Cycling Power

To turn an outlet on:

1. Click the Power menu to access the Powerstrip page.

2. From the Powerstrip drop-down, select the PX rack PDU (power

strip) you want to turn on.

3. Click Refresh to view the power controls.

4. Click On.