Owner's manual

CHAPTER 12: ADVANCED ADMINISTRATION 147
5. Click OK when the necessary devices have been selected to work with the application. An
Open dialog window will appear.
6. In the Open dialog window, browse for the location of your application file (usually a .jar
or .cab file), select the file, and then click Open.
The selected application will then be loaded on to CC-SG.
Editing an Application:
1. Select an application from the Application Name drop-down menu in the Applications
section of the Applications tab. Details about the selected application will appear in the
Details area of the tab.
2. Depending on the application, some of these details can be configurable. Configure any
parameters in the Details area as necessary.
3. Click Edit. The Edit Applications window appears.
Figure 146 Edit Applications Window
4. If necessary, select additional Raritan devices the application will function with from the
Available list, and then click Add to add them to the Selected list.
5. If necessary, to remove devices from use with the application, select the device in the
Selected list, and then click Remove.
6. Click OK when the necessary devices have been selected to work with the application.
Deleting an Application:
1. Select an application from the Application Name drop-down menu in the Applications
section of the Applications tab. Details about the selected application will appear in the
Details area of the tab.
2. Click Delete to delete the selected application. A confirmation dialog will appear.
3. Click Yes to confirm or No to cancel without deleting the application.