Installation Manual

0804-0068, 0804-0068B
5” OVAL BAR
1
Components:
Driver Side
Step Bar
Qty 1
Passenger Side
Step Bar
Qty 1
Driver’s Side
Bracket
Qty 3
Passenger Side
Bracket
Qty 3
Rubber
Gasket
Qty 6
Hardware:
M8M x 30MM
Hex Head Bolt
Qty 10
M8 Lock
Washer
Qty 10
M8 Flat
Washer
Qty 10
M10 Flat
Washers
Qty 12
14MM SOCKET
RATCHET
TORQUE
WRENCH
M10 Lock
Washers
Qty 12
M10 x 30MM
Button Head
Bolts
Qty 12
6MM HEX BIT
1. Remove all contents from the pack-
age and check stainless steel tubes for
any damage. Also, verify that all com-
ponents and hardware listed above are
included before you begin installation.
2. Read installation manual and
installation drawing completely.
Understand all brackets and bolts
before installation.
3. Begin installation on the passenger
side. Align Brackets as shown.
Torque Specifications:
For Rocker Panel Mount Installations
M8 through M12 bolts and nuts are set to 15-20 ft lbs.
Tools Required:
Note: When installing the brackets and bars, all hardware must be left loose until all the items are attached.
3
Passenger Side
Rev 5
0804-0068, 0804-0068B