Manualshelf

Installation Manual

ManualsBrandsRaptor Series ManualsAutomotiveRaptor Series 0401-0027M (00-17) Chevy Silverado/GMC Sierra 1500/2500 Crew Cab (6.5ft Bed); 00-17 Chevy Silverado/GMC Sierra 3500 Crew Cab (8ft Bed, Dually) 4" SS W2W Oval Steps
12345678
6. Loosely attach the Support Brace to the U Bolt using two (2) M10 Flange Lock Nuts.
7. Fasten the Support Brace to the Center Bracket using one (1) M10 x 30MM Hex Head Bolt, one (1) M10 Flat
Washer and one (1) M10 Flange Lock nut.
3
8.
Place the Step Bar and the Rubber Gaskets onto the Brackets as shown.
9. Secure the Step Bar to each Bracket using two (2) M10 x 30MM Button Head Screws and two (2) M10
Lock Washers and two (2) M10 Flat Washers per bracket.
Tighten until the split lock washer is
flat against bracket and snug. DO
NOT over tighten and strip the
threaded insert in the tube.
Repeat these steps for passenger
side installation. When all hardware
is in place, everything must be
tightened. See Page 1 for Torque
Specifications.
8
Driver Side
9
M10 x 30MM
BUTTON
HEAD BOLT
M10 LOCK
WASHER
M10 FLAT
WASHER
STEP
BAR
Front
6
FLANGE LOCK
NUT
SUPPORT
BRACE
M10 FLAT
WASHER
M10 FLANGE
LOCK NUT
7
CENTER
BRACKET
M10 X 30MM
HEX HEAD BOLT
DO NOT
OVERTIGHTEN
STEP BAR
RUBBER
GASKET
Rev 1-0814
0401-0027M, 0401-0027MB