Product Manual

- Use peg #32 for 1” tubing
- Use peg #25 for 3/4” tubing
- Use peg #16 for 1/2” tubing
Tools and installation
M3810
Front of block
is ported
1/4” Female NPT
M7510, M8101
Front of block is ported
1/2” NPT Female
Coupler Not Included
Outlet Assemblies
Split Ring
(2) ORings
Nut
no paste or teflon tape
required on fitting nuts
M8200, M8201, M8203
Front of block is ported
1/2” NPT Female (X 2)
M3810W, M7510W
Thru wall outlet
M8200V, M8201V,
M8203V with Shut-Off
Front of block is ported
1/2” NPT Female (X 2)
WARNINGS
• Regulate system pressure to a maximum of 200 psi.
• Pressurize system slowly.
• Turn off air compressor when not in use.
Check local building codes before installation.
• Compressed air is dangerous if not used properly.
• Do not point compressed air source at any part of your body or at any person.
• Always use eye protection when using compressed air.
• CA PROP 65: This product contains chemicals, including lead, known to the State of California
to cause birth defects or other reproductive harm. Wash hands after handling.
Engineered Specialties, LLC • Auburndale, WI • 800-954-3310
For installation tips and warranty information, please visit www.RapidAirproducts.com
7-2016 REV5
CONTAINS LEAD: MAY BE HARMFUL IF EATEN OR CHEWED. MAY GENERATE
DUST CONTAINING LEAD. KEEP OUT OF THE REACH OF CHILDREN.
We hope the Rapidair system blesses your life, thanks for the purchase. We thank Jesus Christ, who made
the ultimate purchase, our salvation thru His death. Read the Bible, you will be amazed at what you find.