STEP 1 STEP 2 STEP 3 (see page 8 for detailed instructions) Today’s Improved Compressed Air Piping Method FAST INSTALLATION TIME -Aluminum piping is easy to cut and lift -O-ring seals ensure a leak free system -No glueing, threading or soldering -Installs in half the time as some traditional methods DIVERSE -Install in small shops to industrial plants -Connect to any existing piping system -Expand or modify the system with ease SUPERIOR AIR QUALITY ENERGY EFFICIENT -Sealed connections means your compre
TECHNICAL SPECIFICATIONS GENERAL SYSTEM RATINGS -190 psi working pressure -0 Deg F to 140 Deg F -compatible with all types of compressor lubricants -compressed air, vacuum, inert gas -conforms to ASME B31.
PIPE SIZE MM PART # OUTSIDE INSIDE LENGTH WEIGHT 3/4” 20mm F1000 .79 in .69 in 19ft 8in 2.6 lbs 1” 4.2 lbs 25mm F2000 .98 in .87 in 19ft 8in 1 1 /2” 40mm F4000 1.57 in 1.43 in 19ft 8in 8.8 lbs 2” 50mm F5000 1.97 in 1.81 in 19ft 8in 10.1 lbs 3” 80mm FI7000 3.15 in 2.98 in 19ft 8in 21.
90° ELBOW SIZE PART NUMBER 3/4” F1003 1” F2003 11/2” F4003 2” F5003 SIZE PART NUMBER 3” FI7003 90° ELBOW 90° REDUCING ELBOW NPT SIZE DROP SIZE FEMALE PART NUMBER 3/4” 1/2” NPT F1093 3/4” 1/4” NPT F1073 1” 3/4” NPT F2083 1” 1/2” NPT F2093 1” 1/4” NPT F2073 45° ELBOW -5- SIZE PART NUMBER 1” F2004 1 1 /2” F4004 2” F5004
EQUAL TEE SIZE PART NUMBER 3/4” F1005 1” F2005 11/2” F4005 2” F5005 SIZE PART NUMBER 3” FI7005 EQUAL TEE REDUCING TEE REDUCING TEE NPT MAIN SIZE DROP SIZE PART NUMBER 1” 3/4” Fastpipe F2107 1 1 /2” 1” Fastpipe F4207 11/2” 3/4” Fastpipe F4206 2” 1” Fastpipe F5207 2” 3/4” Fastpipe F5206 MAIN SIZE DROP SIZE FEMALE PART NUMBER 3/4” 1/2” NPT F1009 3/4” 1/4” NPT F1007 1” 3/4” NPT F2008 1” 1/2” NPT F2009 1” 1/4” NPT F2007 11/2” 3/4” NPT F4008 11/2” 1/2” NPT
END CAP SIZE PART NUMBER 3/4” F1006 1” F2006 11/2” F4006 2” F5006 SIZE PART NUMBER 3” FI7006 SIZE PART NUMBER 3/4” F1111 1” F2222 1 1 /2” F4444 2” F5555 SIZE PART NUMBER 3” FI7777 END CAP INLINE VALVE INLINE VALVE -7-
THREADED MALE NIPPLE SIZE MALE THREAD PART NUMBER 3/4” 1/2” NPT F1018 3/4” 3/4” NPT F1118 1” 1/2” NPT F2018 1” 3/4” NPT F2118 1” 1” NPT F2218 11/2” 11/2” NPT F4418 2” 1 1 /2” NPT F5418 2” 2” NPT F5518 SIZE MALE THREAD PART NUMBER 3” 3” NPT FI7718 SIZE FEMALE THREAD PART NUMBER 3/4” 3/4” NPT F1120 1” 1” NPT F2220 11/2” 11/2” NPT F4420 THREADED MALE NIPPLE THREADED FEMALE NIPPLE -8-
WALL OUTLET TOP INLET OUTLET SIZE FEMALE PART NUMBER 3/4” (2x) 1/2” NPT F1024 1” (2x) 1/2” NPT F2024 (Has bottom moisture drain) WALL OUTLET WITH SHUTOFF TOP INLET OUTLET SIZE FEMALE PART NUMBER 3/4” (2x) 1/2” NPT F1024V 1” (2x) 1/2” NPT F2024V (Has bottom moisture drain) THRU WALL OR OUTSIDE OUTLET C A B D E TOP INLET OUTLET SIZE FEMALE PART NUMBER 3/4” (1x) 1/2” NPT F1024W 1” (1x) 1/2” NPT F2024W (Kit includes A,B,C,D,E) Customer Supplied 1/2” NPT Nipple Length varies per
SADDLE DROP SIZE SADDLE DROP NPT DROP SIZE PART NUMBER 1” 1” Fastpipe F2210 11/2” 3/4” Fastpipe F4110 1 1 /2” 1” Fastpipe F4210 2” 3/4” Fastpipe F5110 2” 1” Fastpipe F5210 MAIN SIZE DROP SIZE PART NUMBER 1” 3/4” Female NPT F2112 1” 1/2” Female NPT F2012 1” 1/4” Female NPT F2011 1 1 /2” 3/4” Female NPT F4112 11/2” 1/2” Female NPT F4012 11/2” 1/4” Female NPT F4011 2” 3/4” Female NPT F5112 2” 1/2” Female NPT F5012 2” 1/4” Female NPT F5011 MAIN SIZE DROP SIZE
SADDLE DROP INSTALLATION STEP 1 STEP 2 STEP 3 STEP 4 1) Position saddle drop opposite the side of the pipe that needs the hole 2) 3) 4) 5) Drill thru one side of pipe with the drill bit, using the hole in the fitting as a locator Insert the saddle drop gasket into the molded cavity Position the saddle drop over the drilled hole with aligning marks, tighten securely Attach the necessary drop pipe or threaded adapter SADDLE DROP INSTALLATION TIPS -system must be de-pressurized before installing, wear
FLAT SURFACE INSTALLATION Ceiling or wall mount Clip has 5/16” thru hole and hex bore for a 5/16” hex nut Hex nut serves as a backer for screws In horizontal installations, mount clip pivot tab up PIPE CLIP MAIN SIZE PART NUMBER X DIMENSION 3/4” F1022-10 15 /16 ” 1” F2022-10 7 /8 ” 1 1 /2 ” F4022-10 1 2” F5022-10 1 3 /4 ” X 15 /16 ” (Pack of 10) HANGING INSTALLATION -Cantilever arm -Cantilever tube supports -Beam Clamp -3/8” threaded rod -Loop hanger -Beam clamp-Pipe Clip -5/16” theaded
FASTPIPE INSTALLATION STEPS 1) CUT PIPE TO LENGTH with tubing cutter (cut must be square) (DO NOT USE HACK SAW ) 2) DEBURR the end of the pipe outside and inside 3) MARK END OF PIPE for the proper insertion depth 3/4” Fittings: 2 inches 1” Fittings: 2-3/4 inches 1-1/2” Fittings: 4 inches 2” Fittings: 4-3/4 inches 3” Fittings: 4-1/2 inches 4) WET END OF PIPE, with very diluted soapy water DO NOT USE ANY OIL OR GREASE LUBRICANT 5) LOOSEN FITTING CONE NUT PARTIALLY LOOK INSIDE EACH FITTING FOR INNER
TOOLS AND ACCESSORIES SPANNER WRENCH DEBURR TOOL TOOL SET MAIN SIZE PART NUMBER MAIN SIZE PART NUMBER 3/4” 1” F1020 F2020 3/4” F0136 1 1 /2 ” F4020 1” F0137 2” 3” F5020 FI7020 1 1 /2 ” F0138 2” F0145 3” FI0146 (2) Required MAIN SIZE PART NUMBER 3/4” & 1” F0142 3/4” thru 2” F0141 JUMPER HOSE (MALE NPT X SWIVEL FEMALE NPT) MAIN SIZE 1 /2 ” 1 /2 ” 3 /4 ” 3 /4 ” 1” 1” ELECTRIC DRILL REQ.
FastPipe also comes in convenient master kit assemblies.
To help us develop a parts list and quote for your piping installation, use this quote worksheet. Answer the questions and hand sketch your air piping layout and outlet location.
