Installation Manual

6
Curl guide open
Baery and Charger Safety
1. Do not charge baery using a generator.
2. Do not leave baery in charger once
fully charged.
3. Only use supplied charger.
4. Only charge directly via charger.
5. If baery is fully charged but operang
me is signicantly reduced, baery
is defecve and must be replaced
immediately.
6. Do not expose baery or charger to wet
or damp condions.
7. Do not cover or place anything on the
charger during use.
8. Do not expose baery or charger to a
heang source or open re.
9. Do not expose baery or charger
to hazardous materials (includes
ammable items).
10. Charge baery in well venlated places.
11. Only charge baery in temperatures
between 0-40˚C (charging me may be
slower in lower temperatures).
12. Leave charger to rest between charges.
13. Keep charger and baery terminals
clean (only use in dirt and dust free
environments). Use baery cover on
baery when not in use.
14. Ensure new baeries or baeries which
haven’t been used for some me are fully
charged before use.
15. Handle charger cord carefully. Do not
carry charger by cord or unplug charger
by pulling cord.
16. Make sure baery terminals do not come
into contact with each other.
Baery Disposal
Baeries contain substances that can
be harmful to human health and the
environment if they are not handled properly.
Baeries are marked with the crossed trash
bin. This symbolises that waste baeries
must not be disposed with unsorted waste
but must be collected separately.
It is important that you hand in your waste
baeries to the collecon points that are
established. In this way, you help to ensure
that the baeries are recycled in accordance
with legislaon and do not unnecessarily
damage the environment. Your local waste
authories can inform you how to dispose
and recycle this type of baery correctly.
3. Baery & Charger
Operaon
Always read, understand and comply with
safety instrucons (Secon 2) before use.
1. To remove baery, press baery lock
buon before removing from machine
baery slot.
2. Insert baery into charger slot and
baery will automacally begin to
charge (red light permanently on, green
light ashing).
3. When fully charged (green light
permanently on), remove baery
from charger.
4. To install baery, insert baery into
machine baery slot.
Curl Guide: The machine will make a warning
sound and will not e if the trigger is pulled
whilst the curl guide is open. To start tying,
release the trigger and make sure the curl
guide is closed.