Installation Manual

5
2. Safety
This machine is a high performance, baery
operated tool. Failure to follow safety
instrucons may result in serious injury.
Machine and General Safety
1. This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilies, or lack of experience
and knowledge, unless they have
been given supervision or instrucon
concerning use of the appliance by a
person responsible for their safety.
2. Ensure trigger lock is on when not in
use and before switching power on.
3. Authorized personal protecve equipment
must be worn when operang machine
(minimum requirement - protecve gloves).
4. Ensure body parts are well clear
of moving parts (machine mouth,
feeding gears, and wire coil). In
parcular keep hands well clear of
machine mouth when power is on.
5. Use away from others, parcularly children.
6. Children should be supervised to ensure
that they do not play with the appliance.
7. Never aempt to e diameters
outside of prescribed diameter
range for the model (refer to table
in Machine Specicaon secon).
8. Never aempt to service machine (other
than general maintenance procedures
outlined in Maintenance secon). Contact
an authorised service centre if issues arise.
9. Only use Rapid Tool approved spare
parts and accessories with machine.
10. Ensure trigger lock is on and power
is switched o when not in use.
11. Ensure trigger lock is on, power is
switched o and baery removed
when changing or adjusng wire coil.
12. Ensure trigger lock is on and power
switched o when charging baery.
13. Do not expose machine to
wet or damp condions.
14. Do not expose machine to hazardous
materials (includes ammable items).
15. Only use machine in temperatures
between 0-40˚C.
16. Ensure all screws are properly ghtened
and inspect machine, baery and charger
for defects prior to use. Do not use
products if defect is found, contact an
authorized service centre immediately.
17. Ensure machine is properly maintained in
accordance with Maintenance Secon.
Safety Features
The machine is equipped with the following
safety features:
Trigger Lock: The machine is equipped with
a trigger lock. Lock the trigger by pushing
the trigger lock into the downward ‘O’
posion as shown below. Unlock the trigger
by pushing the trigger lock upwards to the
‘On’ posion.
Trigger lock in
locked position
Trigger