Operation Manual

3. Maintenance
General maintenance items below are not covered in machine warranty.
Allen Keys have been provided to assist in general maintenance.
Always switch power o and safety lock on before performing maintenance.
Cleaning
Ensure machine is cleaned aer use to prevent debris from blocking e mechanism openings
(can use compressed air).
Pay parcular aenon to the machine mouth openings.
Loose Wire Jammed In Machine
Loose wire jammed in machine is usually a result of incorrect loading of wire - please see
installing wire coil in Secon 3 of instrucons to ensure wire is loaded using one of the two
correct methods provided.
1. Remove screws and face plates on the machine arm to expose the loose wire.
2. Remove loose wire from the wire feed.
3. Replace and ghten screws and face plates.
Wire Cuer Not Funconing Correctly
Wire cuer issues are usually a result of machine openings not being cleaned properly aer use.
1. Remove screws and face plates on the machine arm to expose the wire cuer.
2. Clean any debris on or around the wire cuer that is prevenng movement.
3. Replace and ghten screws and face plates.
Machine Arm
Face Plates