Operation Manual

Input Output Baery
Charge only 14.4V Li-ION
type rechargeable baeries
100 - 240V 50/60Hz
1.2A
14.4V 2.5A
6 Cell Li-ION
14.4V - 3.0 Ah
WARNING: PLEASE READ THIS MANUAL
CAREFULLY BEFORE USING THIS MACHINE
1. Safety
This machine is a high performance, baery operated tool. Failure to follow safety instrucons
may result in serious injury.
1. Ensure safety lock is on when not in use and before switching power on.
2. Authorized personal protecve equipment must be worn when operang machine (minimum
requirement - protecve gloves).
3. Ensure body parts are well clear of moving parts (machine mouth and wire coil). In parcular
keep hands well clear of machine mouth when power is on.
4. Use away from others, parcularly children.
5. Never aempt to e diameters outside of prescribed diameter range for the model (refer to
table in Machine Operaon secon).
6. Never aempt to service machine (other than general maintenance procedures outlined in
Maintenance secon). Contact supplier if issues arise.
7. Only use Rapid Tool approved spare parts and accessories with machine.
8. Ensure power is switched o when not in use.
9. Ensure power is switched o when changing or adjusng wire coil.
10. Never operate machine in wet or damp condions.
11. Do not operate machine in the presence of hazardous materials.
12. Do not charge baery using a generator.
13. Only use product in temperatures between 0 - 45˚ C.
14. Do not leave baery in charger once fully charged.
15. Only use supplied charger.
16. Only charge directly via charger.
17. Use protecve cap when baery not in use.
2. Specicaons & Parts
Baery Charger