Specification

2
ASPHALT RESURFACER High-Performance, Cement-Based Repair Material for Asphalt
COLD WEATHER: Environmental and material temperatures below 70°F (21°C) may delay
setting time and reduce the rate of strength gain. Lower temperatures will have a more
pronounced effect. Thinner sections will be more significantly affected. To compensate
for cold temperatures, keep material warm and use heated mix water.
WARM WEATHER: Environmental and material temperatures above 70°F (21°C) may
speed setting time and increase the rate of strength gain. Higher temperatures will have
a more pronounced effect. To compensate for warm temperatures, keep material cool
and use chilled mix water.
YIELD & PACKAGING: ASPHALT RESURFACER is available in a 25-lb (11.3 kg) box
and 50-lb (22.7 kg) bag. One 25-lb (11.3 kg) box of ASPHALT RESURFACER will yield
approximately 0.32 ft
3
(0.01 m
3
) or 15 ft
2
(1.4 m
2
) at 1/4” (0.6 cm) average thickness. One
50-lb (22.7 kg) bag of ASPHALT RESURFACER will yield approximately 0.64 ft
3
(0.02 m
3
)
or 30 ft
2
(2.8 m
2
) at 1/4” (0.6 cm) average thickness.
SHELF LIFE: ASPHALT RESURFACER has a shelf life of 12 months when stored
properly in a dry location, protected from moisture, out of direct sunlight, and in an
undamaged package.
USER RESPONSIBILITY: ASPHALT RESURFACER is not recommended for recently poured
or resealed asphalt (within 12 months). Reflective cracks may appear due to vibration,
substrate flexure or existing cracks.
Before using CTS products, read current technical data sheets, bulletins, product labels
and safety data sheets at www.CTScement.com. It is the user’s responsibility to review
instructions and warnings for any CTS products prior to use.
WARNING: DO NOT BREATHE DUST. AVOID CONTACT WITH SKIN AND EYES. Use
material in well-ventilated areas only. Exposure to cement dust may irritate eyes, nose,
throat, and the upper respiratory system/lungs. Silica exposure by inhalation may result
in the development of lung injuries and pulmonary diseases, including silicosis and lung
cancer. Seek medical treatment if you experience difficulty breathing while using this
product. The use of a NIOSH/MSHA-approved respirator (P-, N- or R-95) is recommended
to minimize inhalation of cement dust. Eat and drink only in dust-free areas to avoid
ingesting cement dust. Skin contact with dry material or wet mixtures may result in
bodily injury ranging from moderate irritation and thickening/cracking of skin to severe
skin damage from chemical burns. If irritation or burning occurs, seek medical treatment.
Protect eyes with goggles or safety glasses with side shields. Cover skin with protective
clothing. Use chemical resistant gloves and waterproof boots. In case of skin contact
with cement dust, immediately wash off dust with soap and water to avoid skin damage.
In case of skin contact with wet cement wash exposed skin areas with cold running
water as soon as possible. In case of eye contact with cement dust, flush immediately
and repeatedly with clean water, and consult a physician. If wet cement splashes into
eyes, rinse eyes with clean water for at least 15 minutes and go to the hospital for
further treatment.
Please refer to the SDS and www.CTScement.com for additional safety information
regarding this material.
LIMITED WARRANTY: CTS CEMENT MANUFACTURING CORP. (CTS) warrants its materials
to be of good quality and, at its option, will replace or refund the purchase price of any
material proven to be defective within one (1) year from date of purchase. The above
remedies shall be the limit of CTS’s responsibility. Except for the foregoing, all warranties
expressed or implied, including merchantability and fitness for a particular purpose, are
excluded. CTS shall not be liable for any consequential, incidental, or special damages
arising directly or indirectly from the use of the materials.
L WARNING
CANCER and REPRODUCTIVE HARM - www.P65Warnings.ca.gov
© 2020 CTS Cement Manufacturing Corp. DS_213_EN_092220A
CTS Cement Manufacturing Corp. | 12442 Knott St., Garden Grove, CA 92841 | 800-929-3030 | www.CTScement.com
USGBC and related logo is a trademark owned by the U.S. Green
Building Council and is used by permission.
Set Time, ASTM C266
Initial set 85 minutes
Final set 100 minutes
TYPICAL PHYSICAL DATA