Specification

1
PRODUCT DATASHEET
DESCRIPTION: Rapid Set
®
ASPHALT RESURFACER is a high-performance, fast-setting,
multi-purpose, cementitious material for asphalt repair. ASPHALT RESURFACER has been
specially formulated with a polymer-modified blend of Rapid Set
®
Cement and additives
designed to match the color of typical existing asphalt. Combine ASPHALT RESURFACER
with water to produce a high-quality repair material that is ideal for any asphalt repairs
and resurfacing. ASPHALT RESURFACER has superior adhesion to most substrates. It has
a working time of 20 minutes and achieves drive-on strength in 2 hours.
USES: Use ASPHALT RESURFACER for driveways, parking lots, roads, spall repairs,
cracks, potholes and more.
ENVIRONMENTAL ADVANTAGES: Use ASPHALT RESURFACER to reduce your carbon
footprint and lower your environmental impact. It contains environmentally friendly post-
consumer recycled material and has 0 g/L of VOC. Production of Rapid Set cement emits
far less CO
2
than portland cement. Contact your representative for LEED values and
environmental information.
APPLICATION: Apply ASPHALT RESURFACER in thicknesses from 1/4" (0.6 cm) to 2"
(5 cm). For thicker applications, use ASPHALT REPAIR MIX or extend ASPHALT RESURFACER
up to 75% by weight with clean, coarse aggregate up to 3/4"(1.9 cm). Extended ASPHALT
RESURFACER can be applied in thicknesses up to 24" (61 cm).
SURFACE PREPARATION: For repairs, application surface must be clean, sound and
free from any materials that may inhibit bond, acid, dirt and loose debris. Roughen
surface and remove all unsound material. For maximum adhesion, it is recommended
to pressure wash the surface thoroughly. Remove all standing water prior to applying
ASPHALT RESURFACER.
MIXING: The use of a power-driven mechanical mixer, such as a mortar mixer or a drill-
mounted mixer, is recommended. Organize work so that all personnel and equipment
are in place before mixing. Use clean potable water. ASPHALT RESURFACER may be
mixed using 2 to 3 quarts (1.9 L to 2.8 L) of water per 25-lb (11.3 kg) box. Use up
to 3 quarts (2.8 L) when extended with coarse aggregate. It may be mixed using
4 to 6 quarts (3.8 L to 5.7 L) of water per 50-lb (22.7 kg) bag. Use up to 6.0 quarts
(5.7 L) when extended with coarse aggregate. Place the desired quantity of mix water
into the mixing container. While the mixer is running, add ASPHALT RESURFACER. Mix
for the minimum amount of time required to achieve a lump-free, uniform consistency
(usually 1 to 3 minutes).
PLACEMENT: Organize work so that all personnel and equipment are ready before
placement. Place quickly to allow for maximum finishing time. Do not wait for bleed water;
apply final finish as soon as possible. ASPHALT RESURFACER may be troweled or floated.
A smoother trowel may be used. To match existing asphalt textures, it is recommended to
use a loop roller to apply the final finish or a broom to create a broom-finish. Do not install
in layers; place in full-depth sections. Do not install with a tamping tool like traditional
asphalt cold patch products. Do not install on frozen surfaces. ASPHALT RESURFACER
may be applied in temperatures ranging from 45°F to 90°F (7°C to 32°C).
CURING: ASPHALT RESURFACER does not require water curing under moderate conditions
at 70°F (21°C). In dry, windy or hot conditions, mist with water to maintain a continuously
wet surface for a minimum of 1 hour or until the product has achieved sufficient strength.
Water curing may affect final color.
ASPHALT RESURFACER
High-Performance, Cement-Based Repair Material for Asphalt
OVERVIEW
Highlights:
Superior adhesion to asphalt surfaces
Designed to match the color of typical
existing asphalt
Higher durability than conventional asphalt
Fast setting: Drive-on in 2 hours
Easy to apply: Just add water, mix and place
Extendable with coarse aggregate for
thick applications
Tested in accordance with:
ASTM C266
MasterFormat
®
2016
32 01 17 Flexible Paving Repair
32 12 16 Asphalt Paving
Manufacturer:
CTS Cement Manufacturing Corp.
12442 Knott St.
Garden Grove, CA 92841
Tel: [phone] | Fax: [phone]
Web: www.CTScement.com
E-mail: [e-mail]
PAVEMENT
& OVERL AYS
PRODUCT CATALOG