Specification
2
24/6 CONCRETE MIX Fast-Setting Structural Strength in 24 Hours / 6000 PSI in 28 Days
WARM WEATHER: Environmental and material temperatures above 70°F (21°C) may
speed setting time and increase the rate of strength gain. Higher temperatures will have
a more pronounced effect. To compensate for warm temperatures, keep material cool,
use chilled mix water and follow ACI 305 Procedures for Hot Weather Concreting.
YIELD & PACKAGING: CTS 24/6 CONCRETE MIX is available in 60-lb (27.2-kg) bags. One
60-lb (27.2-kg) bag of 24/6 CONCRETE MIX will yield approximately 0.47 ft
3
(0.013 m
3
).
SHELF LIFE: 24/6 CONCRETE MIX has a shelf life of 12 months when stored properly in a
dry location, protected from moisture, out of direct sunlight, and in an undamaged package.
USER RESPONSIBILITY: Before using CTS products, read current technical data sheets,
bulletins, product labels and safety data sheets at www.CTScement.com. It is the user’s
responsibility to review instructions and warnings for any CTS products prior to use.
WARNING: DO NOT BREATHE DUST. AVOID CONTACT WITH SKIN AND EYES. Use
material in well-ventilated areas only. Exposure to cement dust may irritate eyes, nose,
throat, and the upper respiratory system/lungs. Silica exposure by inhalation may result
in the development of lung injuries and pulmonary diseases, including silicosis and lung
cancer. Seek medical treatment if you experience difculty breathing while using this
product. The use of a NIOSH/MSHA-approved respirator (P-, N- or R-95) is recommended
to minimize inhalation of cement dust. Eat and drink only in dust-free areas to avoid
ingesting cement dust. Skin contact with dry material or wet mixtures may result in
bodily injury ranging from moderate irritation and thickening/cracking of skin to severe
skin damage from chemical burns. If irritation or burning occurs, seek medical treatment.
Protect eyes with goggles or safety glasses with side shields. Cover skin with protective
clothing. Use chemical resistant gloves and waterproof boots. In case of skin contact
with cement dust, immediately wash off dust with soap and water to avoid skin damage.
In case of skin contact with wet concrete, wash exposed skin areas with cold running
water as soon as possible. In case of eye contact with cement dust, ush immediately
and repeatedly with clean water, and consult a physician. If wet concrete splashes into
eyes, rinse eyes with clean water for at least 15 minutes and go to the hospital for
further treatment.
Please refer to the SDS and www.CTScement.com for additional safety information
regarding this material.
LIMITED WARRANTY: CTS CEMENT MANUFACTURING CORP. (CTS) warrants its materials
to be of good quality and, at its option, will replace or refund the purchase price of any
material proven to be defective within one (1) year from date of purchase. The above
remedies shall be the limit of CTS’s responsibility. Except for the foregoing, all warranties
expressed or implied, including merchantability and tness for a particular purpose, are
excluded. CTS shall not be liable for any consequential, incidental, or special damages
arising directly or indirectly from the use of the materials.
L WARNING
CANCER and REPRODUCTIVE HARM - www.P65Warnings.ca.gov
CTS Cement Manufacturing Corp. | 12442 Knott St., Garden Grove, CA 92841 | 800-929-3030 | www.CTScement.com
Set Time, ASTM C403
Initial set 2-3 hours
Final set 3-4 hours
Compressive Strength, ASTM C39
8-10 hours 400 psi (2.78 MPa)
1 day 2500 psi (17.2 MPa)
28 days 6000 psi (41.4 MPa)
Data obtained at 4” slump by ASTM C143 at 70°F (21°C)
TYPICAL PHYSICAL DATA
© 2018 CTS Cement Manufacturing Corp. DS_160_EN_062818A