SDS

Rapid Set Ultra-Fast Anchoring Adhesive Part B SDS US
Version #: 02 Revision date: 23 February 2017 | Issue date: 25 January 2017 Page 5 of 11
Appropriate engineering
controls
No special controls needed. General and local exhaust recommended.
Individual protection measures, such as personal protective equipment
Eye/face protection
Splash proof googles or chemical safety glasses.
Skin protection
Hand protection
Wear appropriate chemical resistant nitrile rubber gloves.
Other
Wear long sleeved shirts and trousers. Emergency showers and eye wash stations
should be readily accessible.
Respiratory protection
None required in adequately ventilated areas. If vapor concentration exceeds 20
ppm for longer than 15 minutes, a NIOSH approved respirator for organic vapors is
recommended.
Thermal hazards
Wear appropriate thermal protective clothing, when necessary.
General hygiene
considerations
When using, do not eat, drink or smoke. Always observe good personal hygiene
measures, such as washing after handling the material and before eating, drinking,
and/or smoking. Routinely wash work clothing and protective equipment to
remove contaminants.
9 PHYSICAL AND CHEMICAL PROPERTIES
Appearance
Physical state
Viscous Liquid until hardening
Form
Liquid
Color
Gray
Odor
Mild
Odor threshold
No data
pH
No data
Melting point/freezing point
No data
Initial boiling point and boiling
range
Decomposes below the boiling point
Flash point
No data
Evaporation rate
No data
Flammability (solid, gas)
Not available
Upper/lower flammability or explosive limits
Flammability limit – lower
(%)
NE
Flammability limit – upper
(%)
NE
Vapor pressure
No data
Vapor density
No data
Relative density
1.55
Solubility(ies)