MSDS

Rapid Set Acrylic Primer
924532 Version #: 01 Revision date: - Issue date: 23-January-2015
SDS US
3 / 6
Individual protection measures, such as personal protective equipment
Eye/face protection
Wear safety glasses with side shields (or goggles).
Skin protection
Hand protection
Use protective gloves made of: Nitrile.
Other
Wear suitable protective clothing.
Respiratory protection
No personal respiratory protective equipment normally required. In case of insufficient ventilation,
wear suitable respiratory equipment.
Thermal hazards
Wear appropriate thermal protective clothing, when necessary.
General hygiene
considerations
Always observe good personal hygiene measures, such as washing after handling the material
and before eating, drinking, and/or smoking. Routinely wash work clothing and protective
equipment to remove contaminants. Observe any medical surveillance requirements.
9. Physical and chemical properties
Appearance
Physical state
Liquid.
Form
Liquid.
Color
Blue.
Odor
Low.
Odor threshold
Not available.
pH
Not applicable.
Melting point/freezing point
Not applicable.
Initial boiling point and boiling
range
413.6 - 705.2 °F (212 - 374 °C)
Flash point
Not applicable.
Evaporation rate
Not applicable.
Flammability (solid, gas)
Not applicable.
Upper/lower flammability or explosive limits
Flammability limit - lower
(%)
Flammability limit - upper
(%)
Not applicable.
Not applicable.
Vapor pressure
Not applicable.
Vapor density
Not applicable.
Relative density
1.07
Relative density temperature
70 °F (21.11 °C)
Solubility(ies)
Solubility (water)
Not applicable.
Partition coefficient
(n-octanol/water)
Not applicable.
Auto-ignition temperature
Not applicable.
Decomposition temperature
Not applicable.
Viscosity
Not applicable.
Other information
Bulk density
Not applicable.
VOC (Weight %)
0 g/l
10. Stability and reactivity
Reactivity
The product is stable and non-reactive under normal conditions of use, storage and transport.
Chemical stability
Material is stable under normal conditions.
Possibility of hazardous
reactions
No dangerous reaction known under conditions of normal use.
Conditions to avoid
Contact with incompatible materials.
Incompatible materials
Strong oxidizing agents.