MSDS

Handling and Storage Precautions: Handle in accordance with good industrial hygiene and safety practices. Wash
thoroughly after handling. Keep container closed when not in use. Protect from freezing.
SECTION 10 — EXPOSURE CONTROL MEASURES
Precautions To Be Taken In Use: Use only with adequate ventilation. Avoid contact with skin and eyes. Avoid breathing
vapor and spray mist. Wash hands after using. This coating may contain materials classified as nuisance particulates
(listed "as Dust" in Section 2) which may be present at hazardous levels only during sanding or abrading of the dried film.
If no specific dusts are listed in Section 2, the applicable limits for nuisance dusts are ACGIH TLV 10 mg/m3 (total dust), 3
mg/m3 (respirable fraction), OSHA PEL 15 mg/m3 (total dust), 5 mg/m3 (respirable fraction). Removal of old paint by
sanding, scraping or other means may generate dust or fumes that contain lead. Exposure to lead dust or fumes may
cause brain damage or other adverse health effects, especially in children or pregnant women. Controlling exposure to
lead or other hazardous substances requires the use of proper protective equipment, such as a properly fitted respirator
(NIOSH approved) and proper containment and cleanup. For more information, call the National Lead Information Center
at 1-800-424-LEAD (in US) or contact your local health authority.
Eye Protection: Wear safety spectacles with unperforated sideshields
Ventilation : Local exhaust preferable. General exhaust acceptable if the exposure to materials in Section 2 is maintained
below applicable exposure limits. Refer to OSHA Standards 1910.94, 1910.107, 1910.108.
Respiratory Protection: If personal exposure cannot be controlled below applicable limits by ventilation.
Protective Gloves: Required for long or repeated contact.
Exposure Limits: Not Available.
SECTION 11 — TOXICOLOGY INFORMATION
No Data Available
SECTION 12 — ECOLOGICAL INFORMATION
No Data Available
SECTION 13 — DISPOSAL CONSIDERATIONS
Waste Disposal Method: Waste disposal should be in accordance with existing Federal, State and local environmental
control laws. Incineration is the preferred method. CA Only: Considered Non-RCRA Hazardous Waste.
Empty Container Precautions: Do not reuse without thorough cleaning. If container is to be disposed, ensure all product
residues are removed prior to disposal.
SECTION 14 — TRANSPORTATION INFORMATION
Multi-modal shipping descriptions are provided for informational purposes and do not consider container sizes. The
presence of a shipping description for a particular mode of transport (ocean, air, etc.), does not indicate that the product is
packaged suitably for that mode of transport. All packaging must be reviewed for suitability prior to shipment, and
compliance with the applicable regulations is the sole responsibility of the person offering the product for transport.
US Ground (DOT) - Not Regulated for Transportation. Canada (TDG) - Not Regulated for Transportation.
IMO - Not Regulated for Transportation. IATA/ICAO - Not Regulated for Transportation.
SECTION 15 — OTHER REGULATORY INFORMATION