MSDS

Inhalation:
If affected, remove from exposure. Restore breathing. Keep warm and quiet.
Skin:
Wash affected area thoroughly with soap and water.
Eye:
Flush eyes with large amounts of water for 15 minutes. Get medical attention.
Ingestion:
Do not induce vomiting. Get medical attention immediately.
SECTION 5 — PHYSICAL & CHEMICAL PROPERTIES
Boiling Point: 212.0 – 374 °F Specific Gravity: 1.07 Melting Point: NA
Vapor Pressure (mm Hg): None
Vapor Density (AIR = 1): > 1
Evaporation Rate: Slower than ether.
Solubility in Water: Soluble. Appearance and Odor : Liquid, mild odor.
Coating VOC: 31.47 g/l Material VOC: 10.69 g/l
SECTION 6 — FIRE & EXPLOSION PROPERTIES
Flash Point : Non-Combustible Flammable Limits: N/A LEL: N/A UEL: N/A
Extinguishing Media: Carbon Dioxide, Dry Chemical, Alcohol Foam
Unusual Fire And Explosion Hazards: Closed containers may explode (due to the build-up of pressure) when exposed to
extreme heat. During emergency conditions overexposure to decomposition products may cause a health hazard.
Symptoms may not be immediately apparent. Obtain medical attention.
Special Fire Fighting Procedures: Full protective equipment including self-contained breathing apparatus should be used.
Water spray may be ineffective. If water is used, fog nozzles are preferable. Water may be used to cool closed containers
to prevent pressure build-up and possible autoignition or explosion when exposed to extreme heat.
SECTION 7 — REACTIVITY INFORMATION
Stability: Stable
Conditions to Avoid: None known.
Hazardous Polymerization: Will not occur
Hazardous Decomposition or Byproducts: By fire: Carbon Dioxide, Carbon Monoxide
Incompatible Materials: None known.
SECTION 8 — ACCIDENTAL RELEASE MEASURES
Steps To Be Taken In Case Material Is Released Or Spilled: Remove all sources of ignition. Ventilate the area. Remove with
inert absorbent.
SECTION 9 — HANDLING AND STORAGE
Storage temperature: minimum: 41 °F maximum: 104 °F