Operation Manual

en-56
6 CONTROLS
A
6.8 FREE WHEEL ________________________________________________________
1. To push the machine, disengage the parking
brake, see section 6.7
2. Turn screw (A) located on the underside of the
left hand side of the transmission pump 3
complete turns counterclockwise. Set the
steering wheel so that the rear wheels are
pointing straight ahead.
3. After pushing the machine, return the parking
brake valve, see section 6.7 to its normal position
and screw (A) on the pump to its operating
position.
WARNING
THE FREE WHEEL FACILITY IS FOR
RECOVERY PURPOSES ONLY.
Do Not Tow The Machine For More Than A Few
Metres, Or Allow The Machine To Free Wheel
Down Slopes Even When Unloading Down Ramps.