Operation Manual

en-26
4 SPECIFICATIONS
4.11 CUTTING UNIT SPECIFICATION MAGNA 20 SPORT 200 ____________________
NOTE
These cutting units are made to cut grass of maximum height 82 mm down to the available height of cut range.
4.12 CUTTING PERFORMANCE _____________________________________________
2.15m (7ft) width of cut:
2.5 hectares/hr at 12 km/h.
6.2 acre/hr at 7.45 mph
(10% allowance is included for normal overlaps and turning at the end of each cut.
4.13 RECOMMENDED LUBRICANTS _________________________________________
Grease:
For rear axle: K NATE (RJL No. 4213860), or equivalent to MIL-G-23549C, MIL-G-2345C, DIN 51 825,
DIN 51 818
All other applications: Shell Darina R2 lithium based grease or equivalent.
4.14 ACCESSORIES ______________________________________________________
Air Suspension Seat Kit
Kit number LMAC201
Magna 250 Sport 200 Verticut
Construction Heavy duty welded pressed steel construction
Reel Length 762mm 762mm 762mm
Number of Knives 6 8
Reel Diameter (New) 247mm 247mm
Minimum Reel Diameter (Before Replacement) 228mm 228mm
Fixed Head Height of Cut (Standard Blade) 12.7mm - 89mm
Rear Roll 76mm Diameter
Height of Cut Adjustment Adjustable screw system on rear roll
Transmission
By direct drive through splined hydraulic motor to splined
reel.
Maximum Reel Speed at Maximum Engine rpm
1150 ± 75 rpm