Operation Manual

en-114
12 QUALITY OF CUT
12.11 TRAMLINING _______________________________________________________
NOTE: Arrow indicates direction of travel.
Tramlining, like wash boarding is a repeating pattern
of varying cut heights, resulting in a ridged
appearance.
Probable Cause Remedy
Missing or broken blades. Replace blades.
If using Half “Y” blades. Replace Half “Y” blades with Paddle blades.
HOC (height-of-cut) setting is too low for turf
conditions.
Check/adjust HOC to turf conditions.
Raising the height of cut will reduce the prominence
of the effect.