Operation Manual

en-111
QUALITY OF CUT 12
12.8 MISMATCHED CUTTING UNITS ________________________________________
NOTE: Arrow indicates direction of travel.
Mismatched cutting units is a pattern of varying
cutting heights, resulting in a stepped cut
appearance, usually due to mismatched HOC
(height-of-cut) adjustment from one cutting unit to
another.
Probable Cause Remedy
HOC inconsistent from one cutting unit to another. Check/adjust HOC on cutting units.
Difference in mower ride height side to side. Check/adjust tire inflation pressure.
Damaged or twisted front mounting pin. Check and replace damaged components.
TN1278