Operation Manual

en-35
8 MAINTENANCE & LUBRICATION
8.5 MACHINE: WEEKLY OR EVERY 50 WORKING HOURS ______________________
1. Lubricate the following with Shell Darina R2 grease.
Also refer to the Lubrication Diagram section 8.1.
(a) Lift arm pivots (A).
(b) Power Take Off Swivel (B).
(c) Power Take Off Clutch (C).
2 . Lubricate the following with SAE30 oil:
Divertor Valve spools.
3. Check all nuts and bolts and hydraulic connections
for tightness.
4. Check for excessive wear/play in the bushes fitted to
the divertor actuator mechanism, lift arm to cam
divertor mechanism and the lift arm pivot pins.
5. Check for excessive wear/play in the transport hooks.
6. Check divertor alignment. See Adjustments.
7. Check cutting unit cylinder cutout height. See
Adjustments.
8. Check security and condition of weight transfer
springs.