Operation Manual

en-34
8 MAINTENANCE & LUBRICATION
8.4 MACHINE: FIRST 50 HOURS THEN EVERY END OF SEASON ________________
Change Hydraulic Oil.
(a) Remove Drain Plug (A) and drain the oil completely.
(b) Change hydraulic oil filter.
(c) Replace the drain plug and fill hydraulic tank with
approx. 82 litres of Shell Tellus 46.
Change Hydraulic Oil Filter.
(a) Wipe filter canister and housing to remove any dirt
present.
(b) Place a suitable drip tray under the filter.
(c) Unscrew filter and dispose of safely.
(d) Replace with new filter canister.
(e) Coat the top outside lip of the filter canister with a thin
film of oil, fill filter with clean hydraulic fluid and refit
the filter canister.
(f) Filter should be replaced before refilling hydraulic
tank.
Change Gearbox Oil.
(a) Lower Cutting Unit Number 1.
(b) Remove Drain Plug (C) and drain the oil completely.
(c) Replace the drain plug and fill (D) gearbox with 0.5
litres of Shell Spirax G (80W 90).
CAUTION
Contact With Oil Can Damage Your Skin. Use
Gloves When Working With any Oil. If You
Come In Contact With Oil, Wash It Off
Immediately.
CAUTION
Dispose Of Used Oil In Accordance With Local
Regulations