Operation Manual

en-31
8 MAINTENANCE & LUBRICATION
8.1 MAINTENANCE & LUBRICATION CHART _________________________________
MAINTENANCE AND LUBRICATION CHART
Interval Item Section
First 50 hours
 Change P.T.O. gearbox Oil
Daily
10 hours
 Check Hydraulic Fluid Level.
 Clean Machine.
Weekly
Every 50 hours
 Check for Loose Components.
 Check for Hydraulic Leaks.
 Check P.T.O. Gearbox Oil
 Lubricate all Cutting Unit Grease Fittings.
 Lubricate P.T.O.
 Lubricate Control Valve Linkage.
End of season
Every 1000
hours
 Change Hydraulic Oil & Filter.
 Lubricate Cutting Unit Gearboxes.
 Change P.T.O. gearbox Oil
Lubricate all Grease fittings weekly
A = Divertor Acctuator Rods, B =Cutting Unit Pivot, C = Cutting Unit Bearing Housing, (see
diagram)
FLUID REQUIREMENTS
Quantity Type
A Hydraulic Oil (with filter) 82 litres ISO VG 46
B P.T.O. Gearbox 0.52 litres Shell Spirax G90
C Cutting Unit Gearboxes - Shell Alvania HDX2
D General Lubrication -
Lithium Based General Purpose Grease
similar to Shell Darina R2
E Power Take Off Shaft - Rocol GP1 Grease