Operation Manual

en-13
4 SPECIFICATION
4.4 CUTTING UNIT SPECIFICATION __________________________________________
NOTE
These cutting units are designed to cut grass of maximum height 100mm down to the available height of cut
range.
Magna Magna Sportcutter Verticut
Construction Heavy-duty pressed steel bolted construction
Reel Length 762mm 762mm 762mm 762mm
Number of Knives 4 6 6 N/A
Number of Blades N/A N/A N/A 54
Reel Diameter (New) 254mm 254mm 197mm 197mm
Minimum Reel Diameter (Before Replacement) 235mm 235mm 178mm N/A
Fixed Head Height of Cut (Standard Blade) 12.7mm - 89mm
Floating Head Height of Cut (Standard Blade) 12.7mm - 35.7mm
Floating Head Height of Cut (Thin Blade) 9mm - 32mm
Rear Roll 60mm Diameter
Height of Cut Adjustment
Adjustable screw system on
rear roll
Adjustable screw system
on front & rear roll
Transmission By hydraulic motor through gear & pinion to reel.
Maximum Reel Speed at Maximum PTO Speed 1240rpm
4.5 RECOMMENDED LUBRICANTS __________________________________________
Hydraulic Oil: ISO VG 46.
Gearbox Pump drive: 80W-90
Cutting unit: Shell Gadus S2 V220
Grease: Lithium Based General Purpose Grease.
4.7 CUTTING PERFORMANCE (AREA) _______________________________________
5 hectares / hour at 12 km
10% allowance is included for normal overlaps and turning at the end of each cut.
4.8 CUTTING PERFORMANCE (FREQUENCY) _________________________________
4-blade Fixed Head: 24 cuts/m at 8 km/h
6-blade Fixed Head: 36 cuts/m at 8 km/h
6-blade Floating Head: 58 cuts/m at 8 km/h