Operation Manual

en-12
4 SPECIFICATION
4.2 MACHINE SPECIFICATION ______________________________________________
Frame construction: Heavy duty fabricated steel
Cutting unit drive: Fixed displacement hydraulic motors.
Transmission: PTO from tractor to gearbox mounted on main frame, through hydraulic pump to
hydraulic solenoid valve to divertor cut off valve then to cutting unit hydraulic
motors.
Cutting Unit Lift: Solenoid cointrolled independent hydraulic lift fed by tractor auxiliary hydraulics.
Controls: Five switches control lift / lower, one switch controlling forward / neutral / reverse &
one switch controlling reel engage.
Electrical System: 12 Volt
Minimum Tractor Power: 45 kW
4.3 HYDRAULIC SPECIFICATION ____________________________________________
Description Liters / Minute. Relief Valve Pressure
Cutting
Forward 29 210bar
Reverse 29 210bar