Operation Manual

en-60
8 MAINTENANCE & LUBRICATION
8.1MAINTENANCE & LUBRICATION CHART ___________________________________
MAINTENANCE AND LUBRICATION CHART
Interval Item Section
First 50 hours
 Change Engine Oil
 Check Fan Belt Tension
 Change Hydraulic Filter
8.2
8.3
8.5
Daily
10 hours
 Check Engine Oil Level.
 Check Safety Interlock System.
 Check Engine Coolant Level
 Check Hydraulic Fluid Level
 Check Tyre Pressure
 Check Engine Bay for Debris
8.2
7.2
8.4
8.5
4.2
8.10
Weekly
Every 50 hours
 Check for Loose Components.
 Check for Hydraulic Leaks.
 Check Fan Belt Tension.
 Check Air Filter Tell Tail Indicator*.
8.10
8.10
8.3
8.8
Every 250
hours
 Change Engine Oil & Oil Filter.
8.2
End of season
Every 1000
hours
 Check Battery Condition.
 Change Engine Oil & Oil Filter.
 Change Engine Air Filter Element*
 Replace Fuel Filters
 Change Hydraulic Oil & Filters
 Drain & Clean Fuel Tank
 Drain & Replace Engine Coolant
8.9
8.2
8.8
8.7
8.5
8.7
8.4
Lubricate all Grease fittings weekly
A = Lift Arm Pivot, B =Cutting Unit Pivot, C = Cutting Unit Bearing Housing, D = Cutting Unit Roll,
E = Steering Ram Ball Joint, (see diagram)
* Check more often in dirty conditions
IMPORTANT
Refer to Engine Manufacturers Manual for Additional Engine Maintenance Procedures
FLUID REQUIREMENTS
Quantity Type
A Engine Oil (with filter) 6.4 Litres litres 10W 30
B Hydraulic Oil (with filter) 36 litres ISO VG 46
C Radiator Coolant 5 litres 50% Anti-Freeze
D Fuel 45 litres No 2-D (ASTM D975) Diesel