User Manual

Turbine Speed: 10,000-60,000 rpm max.
Turbine Type: Impulse - Front Exhaust
Weight: (See outline drawings)
Length & Diameter: (See outline drawings)
Turbine Air Consumption:
(See "Turbine Speed Charts"
in this section.)
Bearing Air: 80 psi nominal (551 kPa)
60 psi min., 100 psi max.
(413-689 kPa)
2-3 SCFM (57-85 SLPM)
Target Distance: 6-12 inches (152-305mm)
Recommended
Brake Air: 100 psi (689 kPa)
Fluid Pressure: 150 psi max.
SPECIFICATIONS
Mechanical
Fluid Flow Rate: 500 cc's/max.
(paint or solvent)
Rotator Atomizer
Change Time:
(Quick Change Time) Approx. 20 sec.
Bell Change Time: Approx. 40 sec.
Bell Cleaning Time: Approx. 2-3 sec.
Speed Readout Pickup: Magnetic
(2 pulses/rev.)
Power Supply:
MicroPak-RansPak
1000 Cascade
Voltage Master II
100kV
Special Control: Serial Atomizer
PulseTrack 2
* Paint Resistance: 1 MΩ to ∞ (Solventborne Direct
Charge Applications)
* Ransburg Meter (See "Accessories" in the "Parts
Idenetication" section for part numbers.)
Aerobell - Introduction
7
LN-9264-08.2
Ransburg