Owner`s manual

R
A
N
G
E
R
S
E
C
U
R
I
T
Y
D
E
T
E
C
TO
R
S
,
I
n
c
.
Follow these steps to install the battery:
1. Use a Phillips screwdriver to remove
the two screws that hold the battery
compartment cover in place and remove
the cover.
2. Carefully disconnect the old battery, if necessary, and
remove
it from the battery compartment.
3.
Snap a new battery onto the battery connector's terminals and place it in the
compartment
4. Replace the cover and secure it with the screws.
When the battery starts to get low, the Body Scanner makes a "chirping" sound
instead of a smooth steady sound, and the indicator blinks on and off rapidly when
it detects metal. Replace the battery, or recharge it if you inserted a rechargeable
nickel-cadmium battery (see “Charging a Nickel-Cadmium Battery”).
7