Product Manual

9
t Pallet jack or forklift for moving crate
t Forklift or Shop crane
tUtility knife
t Crow bar or pry bar.
t Tin Snips or Sheet Metal Snips
t Hammer
t Open end metric wrenches and/or socket set
t Phillips and Slot head screw drivers
t Metric Allen Key set
PARTS REQUIRED BUT NOT SUPPLIED:
t Teon Tape
t Air tting to match shop Air Supply line
t Tool Oil
t Anchor Bolts and Shims (if Anchoring)
SECTION 5 - FEATURES / SPECIFICATIONS
FEATURES / SPECIFICATIONS
MODELS R980XR/XRF
R980NXT/NXTF
MODELS R980AT/ATF
Type of Drive System
Electric / Air
Electric / Air
Motor R980XR - R980NXT
All F Models have Variable Speed
2
HP (110/208‐240VAC 50‐60 HZ)
2 HP (208‐240V, 50‐60 HZ, 1 P)
2
HP (110/208‐240VAC 50‐60 HZ) R980AT
2 HP (208‐240VAC 50‐60 HZ, 1 P) R980ATF
Air Requirement
140‐165 PSI (10‐11 BAR)
140‐165 PSI (10‐11 BAR)
Wheel Clamping Method (Adjustable
4 Clamps ‐ Internal / External
4 Clamps ‐ Internal / External
Adj. RimGuard™ Wheel Clamps Standard
Standard
Table Clamping System
Dual Pneumatic Cylinders
Dual Pneumatic Cylinders
Bead Breaking System Pneumatic Blade / Dual Settings
Pneumatic Blade / Dual Settings
Power Assist Towers
R980XR:None
R980NXT:Standard
Single Assist Tower
Tool Holder
Manual Lock
Manual Lock
Inflation Gauge w/ Integrated Air
Standard
Standard
Inflation Pressure Regulator/Limiter
Standard
Standard
Water Filter
Standard
Standard
Oiler / Lubricator
Standard
Standard
Air Regulator
Standard
Standard
Breaker Bar
Standard
Standard
Large Soap / Lubricator Bucket
Standard
Standard
Brush
Standard
Standard
Alloy‐Steel Mount/Demount Head
Standard
Standard
Plastic‐Polymer Mount/Demount Head
Standard
Standard
Tower Design
R980XR
:Rigid Fixed / Swing Arm
R980NXT:Assist Tower/Swing Arm
Rigid Fixed / Swing Arm
Bead Lifting Roller(s)
None
Single Lifting Roller
Upper Bead Assist Roller
None
Standard
Traveling Drop‐Center Hold Down
None
Standard
Inflation Restraint Device
None
Standard
Bead Seating System
Turbo Blast / Bead Seating
Turbo Blast / Bead Seating
Tool Tray / Bin Storage
Standard
Standard
Motorcycle Turntable Clamps
Optional
Optional
Internal Rim Clamping Capacity
10" – 30” ( 254 mm ‐ 762
10" – 30” ( 254 mm ‐ 762 mm)
External Rim Clamping Capacity
9" – 28" (229 mm ‐ 711
9" – 28" (229 mm ‐ 711 mm)
Turntable Tire Width Capacity
4" – 18" (102 mm – 457
4" – 18" (102 mm – 457 mm)
Bead Breaker Tire Width Capac.
1.5" – 16" (38 mm – 406
1.5" – 16" (38 mm – 406 mm)
Maximum Tire Diameter
50" (1270 mm)
50" (1270 mm)
Shipping Weight
R980XR:
742 lbs. (336 Kg)
R980XRF:
751 lbs. (341 Kg)
R980NXT:
868 lbs. (394 Kg)
R980NXTF: 877 lbs. (398 Kg)
R980AT
:800 lbs. (363 Kg)
R980ATF
:809 lbs. (367 Kg)
*Specifications
are subject to change without notice. *NOTE: Internal and External Wheel Clamping dimensions do not
translate directly to rim or tire sizes as wheel clamping points may vary by wheel manufacturer.
TOOLS REQUIRED FOR ASSEMBLY AND INSTALLATION