Product Manual

TURNTABLE DRIVE BELT

INSPECTION / ADJUSTMENT

1. Remove the Side Panel. (See Fig 15.13)

2. Inspect the Drive Belt for cracking and wear and replace

as necessary. (See Fig 15.14)

3. Loosen the four Motor mounting bolts and nuts. (See

Fig 15.15)

4. Adjust the Belt deflection to 3/8” - 1/2”. (See Fig 15.16)

INFLATION VALVE LUBRICATION

1. Disconnect Air Supply from the machine. (See Fig 15.17)

2. Disconnect the Air Line going to the left port on the

Inflation/Bead Blast Pedal. Place 1/2 oz. of SAE 10W

non-detergent oil or an air tool oil into the open port. (See

Fig 15.18).

Fig 15.12

Pressure

Gauge

Pressure

Relief

Valve

Fig 15.13

Fig 15.15

Fig 15.14

THE MOTOR ON THIS MACHINE CONTAINS HIGH

VOLTAGE. DISCONNECT POWER AT THE RECEP-

TACLE BEFORE PERFORMING ANY ELECTRICAL

REPAIRS. SECURE PLUG SO THAT IT CANNOT BE

ACCIDENTALLY PLUGGED IN DURING SERVICE.

Fig 15.17

3/8”

Adjusting

Belt Tension

Fig 15.16