Product Manual

8. Stand firmly in place and be prepared to hold the Bead

Lifting Tool down as the tire/ Turntable rotates. Depress

the Table Top Pedal and rotate the tire until the bead is

mounted. (See Fig. 13.9 - 13.12)

9. Swing the Assist Tower into position and lower the Roller

Arms so that they press down on the tire to hold the upper

bead in the drop center. The Upper Arm must be locked

and positioned next to the Mount-demount Head. (See Fig

13.13)

10. Depress the Table Top Pedal. As the Turntable rotates

the Lower Arm will follow the tire around. Keep rotating the

table until the bead is mounted. (See Fig 13.14 - 13.16)

NOTE:

THE FOLLOWING PROCEDURES SHOW THE ASSIST

TOWER BEING USED; THE TIRE CHANGER YOU

ARE USING MAY NOT HAVE THE ASSIST TOWER

INSTALLED.*

*NOTE:

ASSIST TOWER IS STANDARD EQUIPMENT

INCLUDED ON THE R980NXT MODEL.

Fig 13.13

Fig 13.14

Fig. 13.9

Fig. 13.10

Fig. 13.11

NOTE:

LOW PROFILE TIRES MAY REQUIRE USE OF THE

BEAD LIFTING TOOL.

Fig. 13.12