Product Manual

12
SECTION 7
INSTALLATION LOCATION
Disconnect tag and lock out power source before
attempting to install, service, relocate or perform any
maintenance. Do not lift or move unit without
appropriately rated equipment. Be sure the unit is securely
attached to any lifting device used.
NEVER use the wood shipping skid for mounting the unit.
Select a location using Figures 7.1 and 7.2. The area
should provide the operator with enough space to use the
equipment in a safe manner. The area selected should be
well lit, easy to clean and should be away from oil, grease,
brake lathe chips, etc. Avoid areas where bystanders and
customers may be present.
R980XR size is approximately:
43” W x 51” D X 80”H
R980NXT size is approximately:
52” W x 44” D X 84”H
R980AT size is approximately:
51” W x 45” D X 73”H
These measurements are the tire changer’s working
range. Persons other than specially trained and
authorized operators are expressly forbidden to enter this
area. Choose a safe location that is in compliance with
current work place safety regulations. Failure to properly
install the tire changer can lead to improper and unsafe
operation.
PROPER UNIT INSTALLATION IS NECESSARY FOR
SAFE USE AND EFFICIENT OPERATION. PROPER
INSTALLATION ALSO HELPS PROTECT THE UNIT
FROM DAMAGE AND MAKES SERVICE EASIER.
ALWAYS KEEP THIS MANUAL WITH UNIT.
Fig 7.1
Fig 7.2
44”
84”
52”
R980NXT
R980AT
73”
45”
51”