Product Manual

5. Either cut or unscrew the metal strapping holding

the Air Tank / Assist Tower to the pallet. Using a fork

lift or shop crane, remove tank from the pallet and set

aside. Secure tank so it can not fall. (See Fig 6.7)

6. Remove the two front and rear bolts and nuts fasten-

ing the tire changer to the pallet, as indicated in the images

below. (See Fig 6.8 - 6.9)

7. Using a shop crane or fork lift, remove the Tire Changer

from the wooden pallet, making sure to follow safe material

handling procedures. (See Fig 6.10)

Fig 6.7

Fig 6.6

HANDLING OF THE MACHINE MUST BE PERFORMED

ONLY WITH AN APPROPRIATE LIFTING DEVICE SUCH

AS A FORKLIFT OR SHOP CRANE. ONLY PERSONNEL

WHO ARE EXPERIENCED AND QUALIFIED ON

MATERIAL HANDLING PROCEDURES SHOULD HANDLE

ANY TRANSPORTATION OR MOVING OF MACHINE.

SECURE THE AIR TANK / ASSIST TOWER WITH

SHOP CRANE/FORKLIFT OR PERSONNEL PRIOR TO

CUTTING METAL STRAPPING AS AIR TANK / ASSIST

TOWER MAY HAVE SHIFTED DURING SHIPPING. BE

CAREFUL AS BANDING MAY SNAP OR FLY WHEN

TENSION IS RELEASED.

Fig 6.8

Fig 6.9

ONLY PERSONNEL WHO ARE EXPERIENCED AND

QUALIFIED ON MATERIAL HANDLING PROCEDURES

SHOULD HANDLE ANY TRANSPORTATION OR MOVING

OF MACHINE.

Fig 6.10