Product Manual

SECTION 6

LIFTING/ UNCRATING

1. The R745 is shipped on a pallet, Approximate

shipping dimensions. (See Fig 6.1)

CAUTION!

Handling of the machine must be performed only with

an appropriate lifting device such as a forklift or pallet

jack. Only personnel who are experienced and

qualified on material handling procedures should

handle any transportation or moving of machine.

CAUTION!

Be careful when cutting steel banding material as items

may become loose and fall causing personal harm or

injury. Always wear gloves when uncrating the machine to

prevent scratches, abrasions, or cuts due to the contact

with packing materials. Eye protection is essential during

uncrating service activity. Safety glasses with side shields,

goggles, or face shields are acceptable.

Remember to report any shipping damage to the carrier

and make a notation on the delivery receipt.

Uncrating Instructions

1. Using a crow bar or pry bar, locate the metal tabs and

pry open the tabs. (See Fig 6.3)

2. The entire wooden box can be lifted off after prying the

Tabs at the base of the crate. (See Fig 6.4)

3. Carefully cut the plastic wrapping and remove.

CAUTION!

Secure the Tower with shop crane or personnel prior to

loosening bolts /cutting strapping as Tower may have

shifted during shipping. Be careful as banding may snap

or fly when tension is released.

4. Unbolt and/or cut the strapping holding the Tower to the

pallet and set aside. (See Fig 6.5)

Fig. 6.1

Fig. 6.2

Fig. 6.3

Fig. 6.4

Fig. 6.5