Product Manual
8
FEATURES / SPECIFICATIONS MODEL R745
Type of Drive System Air / Electric
Motor Dual Voltage 110/220V 50/60HZ 1 Ph.
Air Requirement 140-165 PSI (10-11 BAR)
Wheel Clamping Method 4 Rim-Guard Clamps - Internal / External
Table Clamping System Dual Pneumatic Cylinders
Bead Breaking System Pneumatic Blade
Turntable Speed -360-Degree Rotation 6.9 Seconds
Tool Holder Manual Lock
Ination System Standard
Oiler / Lubricator Standard
Bead Lifting Tool Standard
Large Soap / Lubricator Bucket Standard
Brush Standard
Tower Design Rigid Fixed
Tire Ination Standard
Internal Wheel Clamping Capacity * 11" – 20" (279 mm – 508 mm)
External Wheel Clamping Capacity * 10.5" – 19" (266 mm – 482 mm)
Turntable Tire Width Capacity (Mounting) 2.5" – 15" (63 mm – 381 mm)
Bead Breaker Tire Width Capacity (Demounting) 1" – 12" (25.4 mm – 305 mm)
Maximum Tire Diameter 39" (990 mm)
Shipping Weight 486 lbs. (221 Kg)
Specications are subject to change without notice.
* NOTE: Internal and External Wheel clamping dimensions do not translate directly to rim or tire sizes as wheel
clamping points may vary by manufacturer.
SECTION 5
FEATURES / SPECIFICATIONS: MODEL R745
1. Pallet jack or forklift for moving crate.
2. Shop crane.
3 Utility knife.
4. Crow bar or pry bar.
5. Tin Snips or Sheet Metal Snips
6. Hammer.
7. Open end metric wrenches and/or socket set.
8. Phillips and Slot head screw drivers.
9. Metric Allen Key set.
Parts required but not supplied.
1. Teon tape
2. Air tting to match shop Air Supply line.
3. Tool Oil.
4. Anchor Bolts and Shims (if Anchoring)
TOOLS REQUIRED FOR ASSEMBLY and INSTALLATION