Product Manual
Oiler Maintenance
Check oil level regularly, and perform these maintenance
items weekly.
t Observe the oil and level on the water separator/filter
unit. (See Fig. 17.4)
tDisconnect air supply to machine.
t Add oil to the lubricator if the fluid level is below the
middle of the oil reservoir. Unscrew the Oil Reservoir Fill
Cap, add SAE 10W non-detergent oil or an air tool oil if
necessary. (See Fig. 17.5)
NOTE:
This adjustment will require two persons to perform.
1. With the Air source connected, depress the Bead
Breaker Pedal to operate the Bead Breaker.
2. Observe the site glass and adjust the oil flow of the
oiler by turning the Oiler Adjustment Knob so that 2-3
drops of oil drip through the site glass for each operation
of the Bead Breaker Pedal. (See Fig 17.6)
(The reservoir may be removed for cleaning by turning the
reservoir counter-clockwise and pulling down.)
3. Reconnect the air supply when service/adjustments are
complete.
30
IMPORTANT!
Failure to maintain the Oil
regulator in proper condition may void warranty.
Keep the Oil reservoir filled.
Fig. 17.6
Fig. 17.4
Fig. 17.6