Product Manual
1. Make sure both beads are seated. When both beads are
seated, the tire is ready for inflation.
2. Replace the valve core if it was removed.
3. Depress the inflation Trigger Pedal to inflate the tire.
DO NOT STAND OVER TIRE DURING INFLATION.
4. Do not inflate the tire above the manufacturer’s
recommended pressure as stamped on the tire sidewall.
The typical inflation pressure for automobile tires is between
24 and 45 PSI. Light truck inflation pressure typically
covers a wider range. Release air pressure from the tire by
pressing the manual release valve button.
WARNING!
t Before making any inspection, adjustment, or
repair, disconnect the power source and or air
supply and block out all moving parts to prevent
injury.
t Keep the machine and the immediate work area
clean. Do not use compressed air to remove dirt and
debris from the machine. Foreign material may be
propelled into the air and into operator or bystander
causing personal injury.
tWear protective clothing and use eye
protection when making any adjustments or repairs
to the machine.
28