Product Manual

22. Insert the smooth curved end of the Bead Lifting Tool

over the “duckbill” end of Mount/ Demount Head and below

the lower bead of the tire. Push the Bead Lifting Tool down

toward the wheel to lift the tire bead up and over the “duckbill”

side knob portion of the Mount/ Demount Head. Hold the

Bead Lifting Tool in this position.

(See Fig. 11.23 - 11.24)

23. Depress the Table Top Pedal to rotate the wheel.

(See Fig. 11.25)

24. The Mount/ Demount Head will guide the bead up and

over the edge of the wheel. Continue rotation until the

lower bead is demounted. (See Fig. 11.26 -11.28)

DANGER!

The Bead Lifting Tool and demount head may

encounter resistance or come under load at times

during the mount and demount procedures. Keep

one hand firmly on the tool to avoid possible tool

kick back. Use the reversing feature (lift table top

pedal upwards) to back out of jam ups.

Fig. 11.23

Fig. 11.24

Fig. 11.25

Fig. 11.28

Fig. 11.27

Fig. 11.26