User's Manual

SDRe Programming Software
Revision V1.0
P a g e | 54
Figure 57: Enable CTCSS table on Analog Profile
To store this option, click on any part of the tab. To save the value,
press [Ok] or Cancel if you want to discard the changes.
4.6.1.5. Enable the Voice Log Service on Analog Profiles
ST-9116 repeater can log any voice conversation. If you want to
activate this service for a particular analog profile, please check this
box.
Voice is stored on the SD memory attached to the unit.
Old files are deleted automatically if the memory is full.
If no memory, the service is deactivated automatically.
Figure 58: Voice Log Enabled for Analog Profiles
To store this option, click on any part of the tab. To save the value,
press [Ok] or Cancel if you want to discard the changes.
4.6.1.6. Enable the Roaming Service on Analog Profiles
If you want to integrate a network, using this channel as a site of
your wide area coverage, then you must check this box. Once this
box is checked, audio from this repeater is processed and shared
through IP between any other site on the network.
Figure 59: Roaming Service Activation for Analog Profiles