User's Manual

SDRe Programming Software
Revision V1.0
P a g e | 49
4.5. CTCSS Table:
The SDR repeaters supports up to 32 private groups into analog or
hybrid mode. The signaling used to discriminate the groups is
CTCSS.
To enable a group, list the right CTCSS into the CTCSS table.
Figure 50: CTCSS Table
In case you do not fill any CTCSS table, the repeater operates only with
the defined CTCSS on the frequency chart.
4.6. Profiles:
From the main menu bar, press on [Edit] then [Profiles] to access to
profiles menu.