User's Manual

SDRe Programming Software
Revision V1.0
P a g e | 44
4.3.5. Single Site trunking configuration:
On this tab you can program the IP address and ports for any
repeater into the same site.
Figure 42: Single Site Trunking configuration
Fill the list with the IPs and ports for the repeaters into the same
site. All repeaters must be linked by IP media in order to synchronize
the entire site.
Check the box to enable single site trunking operation.
Multi-site application software is another application. The programming of multi-site
trunking networks are outside of the scope of this manual