User's Manual

SDRe Programming Software
Revision V1.0
P a g e | 40
Figure 35: Manual configuration of the IP address
IP Address: Fill the IP address for your repeater, separated by
dots (IP V4 format).
MASK: Fill the MASK to define the sub net of your device.
Gateway: Fill the IP address (IP V4 format) for the gateway of your
network.
DNS Server: Fill the IP address for the DNS server of your
network.
4.3.3. Roaming/Servers configuration:
On this tab, you can program the parameters required for set the
repeater into a wide area IP network environment.