User's Manual

SDRe Programming Software
Revision V1.0
P a g e | 39
4.3.2.3. Ethernet MDI-X:
Depending of the media type, the polarity of the wiring connection
must be normal or crossed. Press on the side arrow to select the
appropriate configuration for your network.
Figure 33: MDI-X selection
Auto: the PHY detects the type of connection adjusting the mode
on the fly
Normal: Check this one for normal IEEE 802.3 configuration
MDI-X: for crossed connections.
4.3.2.4. IP Address setting:
You have two ways to assign the IP address for the repeater.
DHCP: Check this box to leave an external DHCP server assigns
the most convenient IP address for your device.
Figure 34: Setting DHCP mode
Static: Check this box to define the IP address, mask, gateway
and DNS address manually.